Is there a code for transmission not engaging in park other than that transmission runs like a champ it’s a 2001 Toyota Tundra sr5 access cab auto 4×4 3.4L with 246,900 miles oil changed every 3000 trans drain n fill about every 3 oil changes so about every 10,000 miles
Yes, but nothing to do with tranny truck finally came out of if! I hit tranny lever with pb blast and adjusted cable all the way, but as far as codes popping up I get p1135 air/fuel but my OBD2 scanner shows o2 sensor 1 bank 1 air/fuel working I have a continuous monitor the Bluetooth ones you can leave plugged in and get live data plus everything else and I haven’t had any problems with sputtering or hard starts, power loss nothing the only reason I haven’t replaced it again I’ve done them twice before but I hear my year vehicle is known for popping that p1135 code but my issue now is I changed o2 sensor 2 and that doesn’t register any information other than a Little voltage change to about 0.88v from maybe 0.02 but I was told that sensor doesn’t pull that much voltage is that your experience? Thanks guys sorry it took so long to get back
Is there a code for transmission not engaging in park other than that transmission runs like a champ it’s a 2001 Toyota Tundra sr5 access cab auto 4×4 3.4L with 246,900 miles oil changed every 3000 trans drain n fill about every 3 oil changes so about every 10,000 miles
Scott: We have P1XXX codes available for your truck here:
https://www.troublecodes.net/toyota/4runner-fj-cruiser-highlander-rav4-t100-pickup-tacoma-tundra-pickup-1995-2009/
Any other codes would be generic: https://www.troublecodes.net/pcodes/
Transmission codes are usually P07XX range and there are a number related to gear engagement. Do you have any codes showing up?
Yes, but nothing to do with tranny truck finally came out of if! I hit tranny lever with pb blast and adjusted cable all the way, but as far as codes popping up I get p1135 air/fuel but my OBD2 scanner shows o2 sensor 1 bank 1 air/fuel working I have a continuous monitor the Bluetooth ones you can leave plugged in and get live data plus everything else and I haven’t had any problems with sputtering or hard starts, power loss nothing the only reason I haven’t replaced it again I’ve done them twice before but I hear my year vehicle is known for popping that p1135 code but my issue now is I changed o2 sensor 2 and that doesn’t register any information other than a Little voltage change to about 0.88v from maybe 0.02 but I was told that sensor doesn’t pull that much voltage is that your experience? Thanks guys sorry it took so long to get back