OBD2 Sensors >> Ford 3.5L V6 Ecoboost Engines Sensor Locations

Ford 3.5L V6 Ecoboost Engines Sensor Locations

View with cosmetic engine cover installed.  2018 Ford Flex 3.5L V6 EcoBoost

  1. Fuel injectors (under the intake manifold)
  2. Fuel Injection pump (under cover at front of engine)
  3. Fuel Rail Pressure Sensor (FRPS) – (located at front of engine on top of rear cylinder head cover)
  4. Manifold Absolute Pressure (MAP)/Intake Air Temp (IAT) Sensor (at the front of engine on top)
  5. Camshaft position sensors (CMP) (located at the rear of each cylinder head)
  6. Variable Camshaft Timing solenoids (located on top of cylinder head covers at front of engine)
  7. Oil pressure switch (located at the lower front of the engine)
  8. Knock sensor (KS) (located under intake manifold at the rear of the engine)
  9. Crankshaft position sensor (CKP) (located rear of engine underneath near bellhousing)
  10. Cylinder Head Temp Sensor (CHT) (located under the intake manifold)
  11. Coil on Plug Ignition coils (on top of each cylinder head cover)
  12. Universal Heated Oxygen Sensor (HO2S11) (located in exhaust manifold at front of engine)
  13. Electronic Throttle Control / Throttle Position Sensor (TP)

Models Found On

  • 2015-present Ford Transit
  • 2010–2019 Ford Taurus SHO
  • 2013–2019 Police Interceptor Sedan
  • 2010–2016 Lincoln MKS
  • 2010–2019 Lincoln MKT
  • 2013–2019 Ford Explorer Sport
  • 2016–2019 Ford Explorer Platinum
  • 2010–2019 Ford Flex
  • 2014–2019 Ford Police Interceptor Utility
  • 2011–2016 Ford F-150
  • 2015–2017 Ford Expedition/Expedition EL
  • 2015–2017 Lincoln Navigator/Navigator L

Replacing it? Compare ford 3.5l v6 ecoboost engines sensor locations prices on Amazon.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
most voted
newest oldest
Steve
Steve
3 years ago

First start with cold engine runs normal. After approx 2-3 miles, acceleration has loss of power. Rattling/hesitation experienced above 1st gear. Code reader says “camshaft position” sensor. It indicated a different sensor prior to that replacement & this camshaft position sensor after replacement. Same issue after replacement. I cannot find Camshaft position sensor(s) & are there more than 1?