OBD2 Sensors >> Dodge/Jeep 6.4L SRT HEMI V8 Engine Sensor Locations

1. Fuel injectors (located next to each side of the intake manifold)
2. Camshaft position sensor (CMP) (located at the front of the pass side cylinder head)
3. Oil pressure sensor (pass side behind alternator)
4. Knock sensor 1 (KS) (rear of engine under driver’s side exhaust manifold) 
5. Knock sensor 2 (KS) (rear of engine under pass side exhaust manifold)
6. Crankshaft position sensor (CKP) (located at the driver side rear of engine by the transmission)
7. Engine coolant temperature sensor (ECT) (located at the front of engine)
8. Ignition coils (on top of each cylinder head cover) 
9. Heated Oxygen Sensor 1 (screwed into exhaust pipe attached to driver’s side exhaust manifold)
10. Heated Oxygen Sensor 2 (screwed into exhaust pipe attached to pass side exhaust manifold)
11. Electronic Throttle Body / Throttle Control (front of engine)
12. MDS Solenoids Cylinders 1, 4, 6, and 7 (under the intake manifold)
13. Manifold Absolute Pressure Sensor (MAP) (rear of the engine attached to intake manifold)
14. Inlet Air Temp Sensor
15. Oil Temp Sensor (pass side behind alternator)

Models Found On

• Dodge Challenger SRT 392 (2005 to Present)
• Dodge Charger SRT 392 (2005 to Present)
• Dodge Durango SRT (2005 to Present)
• Jeep Grand Cherokee SRT (2005 to Present)
• Jeep Grand Wagoneer (2005 to Present)
• Jeep Wrangler Unlimited Rubicon 392 (2005 to Present)