Nissan / Cummins 5.0L V8 Engine Sensor Locations

Nissan / Cummins 5.0L V8 engine sensor location diagram

2016 Nissan Titan XD 5.0L Cummins V8
  1. Fuel injectors (on top of valve cover center of each cylinder head)
  2. Camshaft position sensor (CMP) (located on front of pass side cylinder head cover)
  3. Engine Oil Pressure Switch (driver’s side lower front of engine block)
  4. Rotary Turbine Control Valve Actuator (center of intake manifold attached to turbocharger housing)
  5. Fuel Rail Pressure Sensor (end of fuel rail towards front of engine bank 1 pass side)
  6. Fuel Pressure Relief Valve (end of fuel rail towards rear of engine bank 2 driver side)
  7. Fuel Pump Actuator (mounted to fuel pump)
  8. Crankshaft position sensor (CKP) (located at the lower front of engine by the crankshaft damper)
  9. Engine coolant temperature sensor (ECT) (located on front of pass side cylinder head cover)
  10. Intake Manifold Air Temp Sensor (attached to intake manifold towards front of engine)
  11. Exhaust Gas Pressure Sensor (attached to intake manifold towards rear of engine)
  12. EGR Airflow Control Valve / Throttle Plate (attached to intake manifold next to EGR Valve)
  13. Engine Charge Air Cooler Outlet Pressure/Temp Sensor (front of engine bolted to intake manifold)
  14. Turbo Compressor Intake Pressure Temp Sensor (attached to air filter closest to engine)
  15. EGR Temp Sensor (attached under front of intake manifold)
  16. Mass Airflow Sensor (attached to air filter housing)
  17. Low Pressure Turbo Boost Pressure Sensor (screwed into a tube mounted in the vee of the engine)

Models Found On

  • 2016-2019 Nissan Titan XD
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
most voted
newest oldest