P0406 – Exhaust Gas Recirculation Sensor “A” Circuit High (Kia)
| Code | Fault Location | Probable Cause |
|---|---|---|
| P0406 | Exhaust Gas Recirculation Sensor “A” Circuit High (Buy Part On Amazon) | EGR valve, position sensor |
We recommend Torque Pro
Table of Contents
- What Does Code P0406 Mean?
- Where is the P0406 sensor located?
- What are the common causes of code P0406?
- How expensive is it to fix code P0406?
- What are the symptoms of code P0406?
- What are common solutions to code P0406?
- How serious is code P0406?
- How difficult is it to repair code P0406?
- Codes Related to P0406
- Get Help with P0406
What Does Code P0406 Mean?
SPECIAL NOTES: Although code P0406 refers to an unexpectedly high input voltage from the EGR valve’s position sensor as a general rule, there are two notable exceptions to this rule with two major car manufacturers, NISSAN and General Motors, having assigned different fault criteria to code P0406. Below are some details of how NISSAN and GM define code P0406-
- NISSAN defines code P0406 as “ EGR Temperature Sensor Circuit High Input”, which refers to the temperature of the exhaust gas passing through the EGR valve, as opposed to a failure or malfunction in the EGR valve’s position sensor or its associated electrical circuits
- General Motors defines code P0406 as “EGR Control BARO Sensor Circuit High Input Conditions”, which refers to an unexpected high EGR gas pressure, as opposed to a failure or malfunction in the EGR valve’s position sensor or its associated electrical circuits
These are important distinctions from a diagnostic perspective because the causes, symptoms, and fixes that apply to code P0406 on NISSAN and GM vehicles differ from the causes, symptoms, and fixes that apply to code P0406 on all other vehicle makes and models. END OF SPECIAL NOTES.
OBD II fault code P0406 is a generic fault code that is defined by carmaker KIA as P0406 – “Exhaust Gas Recirculation Sensor “A” Circuit High” and is set when the PCM (Powertrain Control Module) detects a defect, failure, or malfunction in the position sensor of the EGR (Exhaust Gas Recirculation) valve. More specifically, code P0406 refers to the input signal generated by the EGR valves’ position sensor being higher than expected under current engine operating conditions.
In all EGR-equipped engines, the purpose of the EGR system is to divert some exhaust gas away from the exhaust system and then introduce the diverted exhaust gas into the air intake system via a calibrated and computer-controlled valve, known as the EGR valve.
While it might seem counterproductive to feed largely incombustible exhaust into the cylinders, doing so reduces the high combustion temperatures that are a feature of modern internal combustion engines as a means of preventing the formation of NOx, a harmful and toxic combination of oxygen and nitrogen. As a practical matter, oxygen in the fuel and nitrogen in the intake air combine at combustion temperatures of about 2379 degrees F to form NOx, a generic name for a group of several toxic exhaust gases that are implicated in environmental degradation and many human health issues.
So, since combustion temperatures in many modern engines often exceed the temperature at which NOx forms, one common strategy to reduce combustion temperatures is to introduce small amounts of exhaust gas into the cylinders to reduce the efficiency of the combustion process under some engine operating conditions to reduce the combustion temperature to below the level at which NOX forms.
However, to make this system work effectively, the flow of exhaust gas into the cylinders must be-
- metered exactly to prevent an over-dilution of the air/fuel mixture, and
- introduced only when optimal combustion conditions are not critical for efficient engine operation, such as during steady high-speed cruising at highway speeds
In terms of operating principles, the PCM will monitor operating conditions continuously, and when the PCM deems the current operatingconditions are likely to produce NOx in the cylinders, it will command the EGR valve open by a calculated amount to introduce only enough exhaust gas into the cylinders to prevent the formation of NOx. However, since the PCM cannot monitor or measure the rate of exhaust gas flowing through the EGR valve exactly, it uses the position of the EGR valve’s pintle to infer the volume of exhaust gas that flows through the valve.
In a fully functional EGR system, no exhaust gas will flow through the EGR valve when it is in the closed position but since the PCM cannot monitor the position of the valve pintle directly, it relies on a sensor whose function it is to monitor the status of the valve continuously. In practice, the position sensor is the only input data source the PCM uses to monitor the EGR valve’s status.
In most designs, the position sensor is fed with a 5V reference voltage that changes as the position of the EGR valve’s pintle moves in both directions. The PCM interprets the changes in the position sensor’s signal voltage as changes in the position of the EGR valve pintle, and by extension, the effective diameter of the EGR valve’s opening. Based on this information, the PCM a) infers the volume of exhaust gas that enters the engine, and b) when the EGR valve is in the closed or fully open positions.
In practice, most EGR control systems work reasonably well but given the harsh conditions that EGR valves are subjected to, it is not surprising that the actual positions of their moveable parts often do not agree with the positions that a PCM expects to see under any given set of operating conditions. For instance, a PCM typically expects to see a fully closed EGR valve during idling or WOT (Wide Open Throttle) conditions, but a build-up of carbon inside the valve could prevent the valve from closing fully.
In such cases, the PCM will receive an input voltage from the EGR valve position sensor that is higher than it expects to see, and as a result, the PCM will set P0406 and illuminate a warning light. In rare cases, the PCM might also initiate and maintain a fail-safe or limp mode that will persist until the fault is found and corrected.
Where is the P0406 sensor located?
This image shows the EGR valve and EGR cooler removed from a 2009 KIA 1.7L D4FD engine for the sake of clarity. In this view, the arrows indicate the following-
- the red arrow indicates the outer skin of the EGR cooler
- the yellow arrow indicates the vacuum actuator that controls the rate of coolant flow through the cooler
- the part indicated by the green circle is the actual EGR valve
- the blue arrow indicates the port through which exhaust gas enters the engine through the intake manifold
- the two unmarked hoses in the foreground are coolant hoses that transport engine coolant through the EGR cooler
Note that although several EGR valve/cooler assemblies might fit on a D4FD engine, and might even seem to work, only EGR valves that are calibrated for use on D4FD engines will work as expected. Put differently, you need to be sure that when you replace an EGR valve on a D4FD engine, you must ensure that the valve is calibrated for a D4FD engine. Moreover, avoid buying used or non-OEM parts online because you can never be sure that the parts you bought will work on your engine – if they work at all.
What are the common causes of code P0406?
The most common causes of code P0406 are similar across all KIA applications and could include one or more of the following-
- Excessive carbon build-up in the EGR valve that prevents the free movement of the EGR valve pintle
- EGR valve stuck in the open position
- Faulty or malfunctioning position sensor
- Dislodged or damaged vacuum lines that prevent the EGR valve’s vacuum actuator from functioning correctly
- The use of a substandard aftermarket EGR valve
- The use of an unsuitable or incorrect EGR valve
- Failing to perform the required procedure that allows the PCM to relearn the open and closed positions of a replacement EGR valve. This procedure is critically important to ensure the proper operation of a new EGR valve
How expensive is it to fix code P0406?
As a general rule, replacing the EGR valve on a KIA 1.7 CRDI (D4FD) engine is a challenging procedure even for professional mechanics who have access to all the required tools and equipment. Therefore, having the EGR valve replaced in a professional environment can take up to about four hours, which adds considerably to the final repair bill.
Nonetheless, bear in mind that diagnosing EGR issues can take up to an hour, so at a minimum, the final repair bill could run to about 5 hours, one of which will typically be charged at a higher rate than ordinary labor per hour.
You also have to add the price(s) of all required parts to the labor and diagnostic charges, meaning that the repair bill could run to several hundred dollars, which will typically not include taxes, levies, and fees that may apply to your state or location.
Based on the above, we strongly recommend that you obtain price estimates from at least three or four repair establishments that have proven experience in KIA vehicles to get the most value for your money. Failing to shop around for the best prices could leave you with a repair bill that is higher than you are prepared or able to pay, but having said that, you should expect a repair bill of several hundred dollars.
What are the symptoms of code P0406?
The most common symptoms of code P0406 are similar across all KIA applications and could include one or more of the following-
- Stored trouble and an illuminated CHECK ENGINE warning light
- In some cases, multiple additional trouble codes may be present along with P0406 (See the section on Related Codes for details of the most common additional codes that may be present)
- The vehicle may alternately surge and stumble
- The idling quality may be poor, or the engine may not idle at all
- The engine may stall unexpectedly or repeatedly at low to moderate engine speeds
- The exhaust system may emit excessive amounts of black smoke under some operating conditions
- Varying degrees of power loss may be present at some or all engine speeds and loads
- A hard-starting condition may be present
What are common solutions to code P0406?
The most common solutions to code P0406 on Kia vehicles could include the following-
- Replace the EGR valve, but take note that this option should ideally only be considered if all of the other repair options listed here have been attempted, but the issue persists-
- Inspect and repair all damaged, perforated, or dislodged vacuum lines as required
- Test the operation of the vacuum actuator to verify that it works as both designed and expected
- Test the operation of the EGR valve to verify that it works as both designed and expected
- Test the operation of the EGR valve’s position sensor to verify that it works as expected (See the section on Troubleshooting / Difficulty for more details
- Check to see if the exhaust gas feeder tube is restricted. Clear out restrictions and carbon deposits as required or replace the feed tube
- Remove the EGR valve and clear out excessive carbon deposits; reinstall the EGR valve and verify that it works as expected
How serious is code P0406?
Although a defective or non-functioning EGR valve can cause some drivability issues, it is possible to continue to drive the vehicle for a limited period. However, code P0406 must be considered as somewhat serious, and, therefore, the fault must be found and corrected as soon as possible to avoid causing damage to the engine and other emission control devices.
How difficult is it to repair code P0406?
Troubleshooting code P0406 will generally follow the pattern set out above, but it should be noted that testing the operation of the position sensor involves electrical measurements that require skills and equipment that are generally not available to novice or inexperienced non-professional mechanics.
Such measurements must be performed in a set order and in strict accordance with OEM-level service information to prevent possibly fatal damage to one or more control modules. Thus, based on this fact, we strongly recommend that novice non-professional mechanics do NOT attempt any diagnostic procedure on the EGR system of any KIA product because even inadvertent mistakes could cause serious damage to the vehicle’s electrical system.
Thus, if you suspect you are dealing with a defective EGR system, the best course of action would be to seek professional assistance with diagnosing and resolving any EGR-related fault code(s).
Codes Related to P0406
Below is a list of the EGR-related trouble codes that are most commonly associated with code P0406, but note that codes P0403, P0404, and P0405 are the codes that are the most likely to be present along with P0406.
- P0403- “Exhaust Gas Recirculation (EGR) Control Circuit”
- P0404- “Exhaust Gas Recirculation (EGR) Control Circuit Range/Performance”
- P0405- “Exhaust Gas Recirculation (EGR) Sensor “A” Circuit Low”
- P0407- “Exhaust Gas Recirculation (EGR) Sensor “B” Circuit Low”
- P0408- “Exhaust Gas Recirculation (EGR) Sensor “B” Circuit High”
- P0409- “Exhaust Gas Recirculation (EGR) Sensor “A” Circuit”
- P0486- “Exhaust Gas Recirculation (EGR) Sensor “B” Circuit”
- P0489- “Exhaust Gas Recirculation (EGR) Control Circuit Low”
- P0490- “Exhaust Gas Recirculation (EGR) Control Circuit High”
Help Us Help You
Please comment below describing your issue as well as the specifics of your vehicle (make, model, year, miles, and engine). A mechanic reads these, and other owners often recognise the symptoms straight away.
Reading P0406 on your car
A basic adapter will show you P0406, but not the ABS, airbag or transmission modules, and not the bidirectional tests that confirm which part has actually failed rather than which circuit reported it.
