Honda >> CR-V 2.4L – Element 2.4L – Fit 1.5L (2003 – 2009)

Model Year Engine identification System
CR-V 2.4L 2007-09 K24Z1 PGM-FI
Element 2.4L 2003-08 K24A4/K24A8 PGM-FI
Fit  1.SL 2007-09 L15A1 PGM-FI

General information

  • Malfunction indicator lamp (MIL) will illuminate if certain faults are recorded.
  • ECM operates in backup mode if sensors fail, to enable vehicle to be driven to repair shop.

Accessing

  • Trouble codes can only be displayed by using a Scan Tool connected to the data link connector (DLC) 1.

Erasing

  • Trouble codes can only be erased by using a Scan Tool connected to the data link connector (DLC) 1

Trouble code  identification

OBD·II code Fault location Probable cause
PO,P2,UO Refer to OBD-11 trouble code tables
P1009 Camshaft position (CMP), intake/lefUfront, bank 1 – circuit malfunction/timing   over-advanced/system performance Wiring, valve timing, engine mechanical fault, CMP actuator, ECM
P1109 Barometric pressure (BARO) sensor- range/performance problem BARO sensor, ECM programming, ECM
P1116 Engine coolant temperature (ECT) sensor – range/performance problem Wiring, ECT sensor, ECM programming, ECM
P1121 Throttle position (TP) sensor – position lower than expected TP sensor
P1122 Throttle position (TP) sensor – position higher than expected TP sensor
P1128 Manifold absolute pressure (MAP) sensor – pressure lower than expected Wiring, MAP sensor
P1129 Manifold absolute pressure (MAP) sensor – pressure higher than expected Wiring, MAP sensor
P1157 Heated oxygen sensor (H02S) – circuit malfunction Wiring, H02S, ECM programming, ECM
P1172 Heated oxygen sensor (H02S) 1 – circuit malfunction Wiring, H02S, ECM programming, ECM
P1297 Electrical load sensor – circuit/voltage low Wiring, electrical load sensor, ECM   programming, ECM
P1298 Electrical load sensor – circuit/voltage high Wiring, electrical load sensor, ECM   programming, ECM
P145C Evaporative emission (EVAP) canister purge system – incorrect flow Wiring, hose leak/blockage, EVAP canister purge valve, mechanical fault, ECM programming, ECM
P1454 Fuel tank pressure sensor – range/performance problem   Wiring, hose, fuel tank pressure sensor, fuel filler cap, EVAP canister/vent valve, ECM programming, ECM
P1549 Generator system – high voltage Wiring, generator, ECM programming, ECM
P1658 Electronic throttle system (ETS) control relay – on malfunction Wiring, fuse, ETS control relay, underhood fusebox/refay plate, ECM programming, ECM
P1659 Electronic throttle system (ETS) control relay – off malfunction Wiring, fuse, ETS control relay, underhood fusebox/relay plate, ECM programming, ECM
P1688 Generator system – low voltage Wiring, generator, ECM programming, ECM
P168C Generator system – low voltage Wiring, generator, ECM programming, ECM
P16CO Engine control module (ECM) – malfunction ECM programming, ECM
P1683 Throttle motor – default position spring performance problem Wiring, throttle sticking/mechanically damaged, throttle motor
P1684 Throttle motor – return spring performance problem Wiring, throttle sticking/mechanically damaged, throttle motor
P1717 Transmission range (TR) switch – open circuit Wiring, transmission shift fink adjustment, TR switch, ECM programming, ECM
P1730 AT- gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid A/8/D, ECM programming, ECM
P1731 AT – gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid E, AT clutch pressure control solenoid A, ECM programming, ECM
P1732 AT – gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid 8/C, ECM programming, ECM
P1733 AT- gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid D, AT clutch pressure control solenoid C, ECM programming, ECM
P1734 AT- gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid 8/C, ECM programming, ECM
P1735 AT – gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid 8/C/E, AT clutch pressure control solenoid A, ECM programming, ECM
P1736 AT- gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid B/E, AT clutch pressure control solenoid A, ECM programming, ECM
P1746 AT – gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid AlB, ECM programming, ECM
P1747 AT – gear shift malfunction Transmission fluid, mechanical fault, wiring, shift solenoid AlB, ECM programming, ECM
P1780 AT – gear shift malfunction Other AT trouble codes stored, ECM   programming, ECM