P15B9 – Check Valve (Intake Manifold) Leak Detected (BMW)
| Code | Fault Location | Probable Cause |
|---|---|---|
| P15B9 | Check Valve (Intake Manifold) Leak Detected (Buy Part On Amazon) |
We recommend Torque Pro
Table of Contents
- What Does Code P15B9 Mean?
- Where is the P15B9 sensor located?
- What are the common causes of code P15B9?
- What are the symptoms of code P15B9?
- Get Help with P15B9
What Does Code P15B9 Mean?
SPECIAL NOTES: Note that carmakers Honda and Acura also assign the definition “Check Valve (Intake Manifold) Leak Detected” to trouble code P15B9. However, while this code has the same meaning for Honda and Acura as it does for BMW, the code setting parameters and common symptoms of this code on Honda and Acura vehicles may differ from those on BMW applications. END OF SPECIAL NOTES.
OBD II fault code P15B9 is a manufacturer-specific trouble code that is defined by carmaker BMW as P15B9 –“Check Valve (Intake Manifold) Leak Detected”, and is set when the PCM (Powertrain Control Module) or DME (Digital Motor Electronics) in BMW-speak detects a vacuum leak either in the brake booster check valve or in the intake manifold.
Vacuum assistance has been a feature on all modern brake systems for many years. However, while the basic operating principles of vacuum-assisted brake boosters are much the same across all applications, including BMW applications, the number of ADAS (Advanced Driver Assist Systems) that are tied to the brake systems of modern vehicles has increased dramatically over the past decade or so.
Thus, while the ABS system depends on a minimum level of vacuum assistance to bring a vehicle to a stop safely, other systems like traction control, stability control, automatic emergency braking, forward crash mitigation, and adaptive cruise control depend on the same level of vacuum assistance to preserve the vehicle’s stability while it is moving. In short, these systems apply elective braking forces to individual wheels to prevent dangerous situations such as skids and slides from developing during, for instance, evasive maneuvers at high speeds.
As a practical matter, it might be possible to stop a vehicle safely with less than the minimum required vacuum assistance to the ABS brakes, but the ADAS systems mentioned above require that the brake system, on which they depend to work as designed, be in full working order for them to operate. As a general rule, ADAS systems that use the ABS brake system to operate typically function in short bursts, and more often than not, in multiple short bursts for periods that are sometimes measured in milliseconds.
In terms of operating principles, the brake booster is divided into two halves with a flexible diaphragm, thus creating a compartment within the booster that is evacuated by the engine vacuum. This arrangement allows atmospheric pressure to act on the diaphragm when the brakes are applied, thereby greatly boosting the force a driver applies to the brake pedal.
However, since the vacuum that the brake system depends on to work derives from the intake air system, repeated applications of the brakes affect the manifold vacuum, which in turn greatly affects the engine’s operation at low engine speeds. To prevent this, the vacuum line between the inlet manifold and the brake booster is fitted with a check valve that both regulates and maintains the vacuum in the brake booster, thus preventing large vacuum fluctuations in the intake manifold regardless of the engine speed.
In a fully functional brake system, the check valve plays a critically important role, since it maintains the minimum required vacuum in the brake booster for not only the ABS system to work, but also to ensure the correct operation of all ADAS systems that use the same parts, sensors, and components as the ABS system to work.
Therefore, when the DME (Digital Motor Electronics) or other control module detects either a lack of vacuum in the brake booster or fluctuations in the intake manifold that do not correlate with commanded changes in engine speed or throttle control, it will recognize that it cannot control the ABS system or ABS-dependent ADAS systems properly. As a result, the reporting control module(s) will set trouble code P15B9 and illuminate one or more warning lights.
Where is the P15B9 sensor located?
This image shows the appearance and location of the brake booster check valve on an E 60 5-Series BMW application. Note that while the check valve “plugs” directly into the brake booster in this example, the check valve could also be located in the vacuum hose about halfway between the intake manifold and the brake booster on other BMW applications.
What are the common causes of code P15B9?
The most common causes of code P15B9 are much the same across all BMW applications, and could include one or more of the following-
- Defective check valve; the build-up of carbon deposits or other residues on the check valve’s moving parts could potentially prevent the valve from maintaining a vacuum in the brake booster
- Perforations and leaks in the vacuum line can and do, mimic the symptoms of a defective vacuum check valve
- A damaged, ruptured, or perforated brake booster diaphragm can also mimic the symptoms of a defective check valve
- A damaged, or torn rubber seal in the brake booster can prevent the build-up of a vacuum in the brake booster
Leaks in intake manifold gaskets and/or seals; severe manifold leaks can prevent the evacuation of the booster
What are the symptoms of code P15B9?
Common symptoms of code P15B9 are largely the same across all BMW applications, and could include one or more of the following-
- Stored trouble code and one or more illuminated warning lights
- Depending on the exact nature of the problem, stopping the vehicle may require extraordinary pressure on the brake pedal
- ABS braking may not be available
- Depending on the application, systems like traction control, stability control, roll-back prevention, adaptive cruise control, and automatic emergency braking may not be available
- The engine sped may fluctuate with every application of the brakes
- The engine may stall at low engine speeds when the brakes are applied
- The idling quality may be rough and erratic, or the engine may not idle at all when the brakes are applied repeatedly
- Fuel consumption may increase noticeably
- Varying degrees of power loss may occur
- The engine may exhibit misfires or misfire-like symptoms at some or all engine speeds and loads
Help Us Help You
Please comment below describing your issue as well as the specifics of your vehicle (make, model, year, miles, and engine). A mechanic reads these, and other owners often recognise the symptoms straight away.
Reading P15B9 on your car
P15B9 is a manufacturer-specific code. Most inexpensive Bluetooth adapters read generic engine codes only and cannot reach these systems at all – reading it, and getting the manufacturer’s own description of the fault, needs a scanner that talks to the other modules.
