B1202 – Fuel Sender Circuit Open

Avatar photo
By Reinier (Contact Me)
Last Updated 2022-03-29
Automobile Repair Shop Owner
CodeFault LocationProbable Cause
B1202 Fuel Sender Circuit Open
(Buy Part On Amazon)

We recommend Torque Pro

Table of Contents

  1. What Does Code B1202 Mean?
  2. Where is the B1202 sensor located?
  3. What are the common causes of code B1202?
  4. What are the symptoms of code B1202?
  5. Get Help with B1202

What Does Code B1202 Mean?

 

OBD II fault code B1202 is a manufacturer-specific code that is defined by carmaker Jaguar as, “Fuel Sender Circuit Open”, and is set when the PCM detects an open circuit in the fuel sender unit’s signal circuit.

NOTE: Although code B1202 – “Fuel sender: circuit open” affects a large number of Jaguar models from many different production years, the most commonly affected models are 2010 to 2012 X150 and X250 models that are fitted with 5.0L and C/S 5.0L V8 gasoline engines.

As on all other modern vehicles, affected Jaguar models use a simple potentiometer that is linked to a floating device to indicate the fuel level in the fuel tank. In terms of operating principles, a potentiometer is fitted with a resistive element that carries the full voltage of the reference voltage that is supplied by the PCM, across its entire length.

In the case of a fuel level sender unit, the floating device is connected to a sliding element that contacts the resistive element, and as the fuel level changes, the sliding element slides across the resistive element, which changes the voltage between the point where the sliding contact touches the resistive element and the reference voltage’s input point.

Put differently, this means that the voltage that is passed back to the PCM, and from there to the fuel gauge, changes as the fuel level changes because the sliding contact follows the changes in the fuel level. Therefore, the voltage that is passed back to the PCM at any point depends on the actual fuel level in the tank, and it is this voltage that a driver sees displayed on a fuel gauge as the fuel level in the tank.

In most cases, potentiometers that are used to indicate fuel levels are robust and very reliable, albeit not always very accurate. Nonetheless, when an open circuit is present in the fuel sender’s signal circuit, the PCM cannot display the fuel level in the tank, and when this happens, the PCM will set code B1202 and may also illuminate a warning light.

Where is the B1202 sensor located?

Illustration for trouble code B1202 - Fuel Sender Circuit Open

This image shows an actual fuel pump assembly from an affected Jaguar X250 model with the floating device that dictates the movement of the sliding contact across the resistive element indicated by the red arrow. Note, though, that this assembly is located inside the fuel tank, which can be accessed by removing the rear seat.

However, while accessing the fuel tank is relatively easy, extracting the fuel pump assembly from the fuel tank requires the use of a special tool to remove the large locking ring that secures the fuel pump assembly to the tank. While this tool is available in the aftermarket, we do not recommend that non-professional mechanics attempt to a) remove the fuel pump assembly from the tanks, and b), attempt the required/recommended repairs for this code.

As a practical matter, this repair involves cutting and rejoining wires to eliminate electrical connectors, and while cutting and joining wires is well within the capabilities of most non-professional mechanics, the actual joining procedure has to be performed with prescribed tools and crimping sleeves, which are generally not available in the aftermarket.

Moreover, note that although simple solder joints will restore the operation of the fuel gauge, solder joints do not offer guarantees that the fuel gauge will display accurate readings. Therefore, the better option is to seek professional assistance with diagnosing and repairing code B1202 on affected Jaguar models.

What are the common causes of code B1202?

The most common cause(s) of code B1202 on affected jaguar models are similar, and could include one or more of the following-

  • Poor electrical connections in the connectors that link the fuel level indicator to the vehicle’s wiring harness
  • Poor electrical connections caused by corrosion in in-tank connectors
  • Defective fuel pump module, but note that this rare

NOTE: In the vast majority of instances of code B1202 on affected Jaguar models, the recommended repair involves removing the black electrical connectors on the fuel pump assembly, and rejoining the wires in these connectors directly- but strictly according to OEM standards to ensure the proper operation of the fuel gauge.

What are the symptoms of code B1202?

Typical symptoms of code B1202 on affected Jaguar models could include one or more of the following-

  • Stored trouble code, but note that in cases where no additional codes are present, code B1202 will typically not produce drivability issues
  • The fuel gauge may not work at all
  • The fuel gauge may only work intermittently
  • The fuel gauge readings may fluctuate wildly between any two points on the scale
  • The fuel gauge may not register more than half-full, regardless of the amount of fuel in the tank

Help Us Help You

Please comment below describing your issue as well as the specifics of your vehicle (make, model, year, miles, and engine). A mechanic reads these, and other owners often recognise the symptoms straight away.

Reading B1202 on your car

B1202 is a body code. Most inexpensive Bluetooth adapters read generic engine codes only and cannot reach these systems at all – reading it, and getting the manufacturer’s own description of the fault, needs a scanner that talks to the other modules.

Scanners that read all systems on Amazon