B0002 – Driver Frontal Stage 2 Deployment Control (Subfault)

BAT Team

By BAT Team (Contact Me)
Last Updated 2016-07-14
A site with free advice from mechanics.

Trouble CodeFault LocationProbable Cause
B0002 Driver Frontal Stage 2 Deployment Control (Subfault)

We recommend Torque Pro

BAT Team Discussions for B0002

  • OBDII Reader recommendations...
    I bought this one recently and has worked well for me. It is normally about 300 bucks and I got it for $199. Than I saw it here for a hundred less :-[ www. usatoolmart. com/Diagnostic-15707381-B00020BM2S-Actron_CP9145_AutoScanner_Diagnostic_Code_Scanner_with_Live_Record_and_Playback_Data_C...
  • '97 Taurus GL 3.0 205k: Brake Failure Mystery During Oil Pan/Front Cover Project
    NickD: ==== I'm guessing the new unit was 'properly oil' when it was filled until the fluid began to drip from the outlet ports. According to the directions supplied, this provides lubrication to the piston seals before bleeding. As for the vacuum pumps from Harbor Fake, it looks like these units...
  • P0430 Caddy SRX 2005
    Thanks for all of the responses. billr: I checked the two fuses that are on the O2 circuits. Both are good. I have no idea whether my scan tool is open loop or closed loop. I can't see anything about that on the tool or in the manual. I checked the wires to the O2 sensors and everything looks OK. S...
  • P0101 and P0420
    [QUOTE="billr, post: 95225, member: 862"]Yeah, a cat rattling is a symptom we have ignored for too long. It may be causing excess exhaust back-pressure, and the article in our "trouble-codes" link suggests that can set the P0101 on some GM vehicles. I would use a gauge to check exhaust pressure be...
  • Chain saw won't start hot
    [QUOTE="jd, post: 105164, member: 513"]I think I've seen similar ones around $5. Made mine from an old plug, a copper pipe fitting, alligator clamp and a screw.[/QUOTE] I second this in a big way. Even until this day, I use this tool heavily. I think I bought it otc. Here is a link. Thexton, proba...