BMW >> 6 Series 4.4/4.8L – X3 2.5/3.0L – Z4 2.5/3.0L – Z8 5.0L (2000 – 2008)

Model: 6 Series 4.4/4.8L (E63/E64) • X3 2.5/3.0L (E83) • Z4 2.5/3.0L  (E85) •  Z8 5.OL (E52)
Year: 2000-08
Engine identification: 25 6S 5, 30 6S 3, 25 6S 5, 30 6S 3, 50 8S 1, N52, N62, N62 844, M54
System: Siemens MS43 • Siemens MS S52 • Motronic ME 9.2.1 • Motronic ME 9.2.2

General information

  • Engine control module (ECM) incorporates self-diagnosis function.
  • Malfunction indicator lamp (MIL) will illuminate if certain faults are recorded.
  • ECM operates in backup mode if sensors fail, to enable vehicle to be driven to workshop.

Accessing

  • Trouble codes can only be displayed by using a Scan Tool connected to the data link connector (DLC).
o 6 Series – driver’s footwell [1]
o X3 – behind cover, ‘A’ pillar driver’s side [2]
o Z4 – driver’s footwell [3]
o ZB driver’s footwell [4]

Erasing

  • After the faults have been rectified, trouble codes can only be erased by using a Scan Tool connected to the data link connector (DLC).

Trouble code  identification

OBD·II code BMW type Fault location Probable cause
PO, P2,   uo Refer to 080-11 trouble code tables
P1041 10334 VVT control module, bank 1 – EEPROM   error VVT control module
P1041 10853 VVT control module, bank 1 – EEPROM   error VVT control module
P1042 10334 VVT control module, bank 1 – RAM error WT control module
P1042 10853 VVT control module, bank 1 – RAM error VVT control module
P1043 10334 VVT control module, bank 1 – ROM error VVT control module
P1043 10853 VVT control module, bank 1 – ROM error VVT control module
P1044 10335 VVT control module, bank 2 – EEPROM   error VVT control module
P1044 10854 WT control module, bank 2 – EEPROM error   VVT control module
P1045 10335 VVT control module, bank 2 – RAM error VVT control module
P1045 10854 WT control module, bank 2 – RAM error VVT control module
P1046 10335 VVT control module, bank 2 – ROM error VVT control module
P1046 10854 VVT control module, bank 2 – ROM error VVT control module
P1047 10336 VVT control circuit, bank 1 – high input Wiring, connections
P1047 10855 VVT control circuit, bank 1 – high input Wiring, connections
P1048 10336 WT control circuit, bank 1 – low input Wiring, connections
P1048 10855 VVT control circuit, bank 1 – low input Wiring, connections
P1049 10336 WT control circuit cables, bank 1 – short circuit Wiring, connections
P1049 10855 VVT control circuit cables, bank 1 – short circuit Wiring, connections
P1050 10336 WT control circuit, bank 1 – circuit malfunction Wiring, connections, WT control module
P1050 10855 WT control circuit, bank 1 – circuit malfunction Wiring, connections, WT control module
P1051 10337 WT control circuit, bank 2 – high input Wiring, connections
P1051 10856 WT control circuit, bank 2 – high input Wiring, connections
P1052 10337 WT control circuit, bank 2 – low input Wiring, connections
P1052 10856 WT control circuit, bank 2 – low input Wiring, connections
P1053 10337 WT control circuit cables, bank 2 – short circuit Wiring, connections
P1053 10856 WT control circuit cables, bank 2 – short circuit Wiring, connections
P1054 10337 WT control circuit, bank 2 – circuit malfunction Wiring, connections, WT control module
P1054 10856 WT control circuit, bank 2 – circuit malfunction Wiring,’ connections, WT control module
P1055 10338 WT control motor, bank 1 – supply voltage high input Wiring, connections
P1055 10857 WT control motor, bank 1 – supply voltage high input Wiring, connections
P1056 10338 WT control motor, bank 1 – supply voltage low input Wiring, connections
P1056 10857 VVT control motor, bank 1 – supply voltage low input Wiring, connections
P1057 10338 WT control motor, bank 1 – supply voltage circuit malfunction Wiring, connections
P1057 10857 WT control motor, bank 1 – supply voltage circuit malfunction Wiring, connections
P1058 10339 WT control motor, bank 2 – supply voltage high input Wiring, connections
P1058 10858 WT control motor, bank 2 – supply voltage high input Wiring, connections
P1059 10339 WT control motor, bank 2 – supply voltage low input Wiring, connections
P1059 10858 WT control motor, bank 2 – supply voltage low input Wiring, connections
P1060 10339 WT control motor, bank 2 – supply voltage circuit malfunction Wiring, connections
P1060 10858 WT control motor, bank 2 – supply voltage circuit malfunction Wiring, connections
P1061 10341 WT limp home request, bank 1 – circuit malfunction Wiring, connections, ECM
P1061 10859 WT limp home request, bank 1 – circuit malfunction Wiring, connections, ECM
P1062 10341 VVT limp home request, bank 1 – full stroke position not reached Wiring, connections, ECM
P1062 10859 VVT limp home request, bank 1 – full stroke position not reached Wiring, connections, ECM
P1063 10341 VVT limp home request, bank 1 – air mass signal malfunction Wiring, connections, mass air flow (MAF)   sensor, ECM
P1063 10859 VVT limp home request, bank 1 – air mass signal malfunction Wiring, connections, mass air flow   (MAF) sensor, ECM
P1064 10342 VVT starting position/parking position comparison – circuit malfunction Wiring, connections
P1065 10227 VVT timeout, no signal – CAN data bus malfunction Wiring, connections
P1065 11741 VVT timeout, no signal – CAN data bus malfunction Wiring, connections
P1066 10227 VVT message monitoring – circuit malfunction Wiring, connections
P1066 11741 VVT message monitoring – circuit malfunction Wiring, connections
P1071 10334 VVT control module, bank 1 – internal malfunction VVT control module
P1071 10853 VVT control module, bank 1 – internal malfunction VVT control module
P1072 10335 VVT control module, bank 2 – internal malfunction VVT control module
P1072 10854 VVT control module, bank 2 – internal malfunction VVT control module
P1087 229 Heated oxygen sensor (H02S) 1, bank 1 – slow response lean control Wiring, intake/exhaust leak, fuel level low, fuel pressure, EVAP canister purge valve, injector(s), H025, ECM
229 Heated oxygen sensor (H02S) 1, bank 1 – slow response rich control Wiring, intake/exhaust leak, fuel level low, fuel pressure, EVAP canister purge valve, injector(s), H025, ECM
P1089 230 Heated oxygen sensor (H02S) 1, bank 2 – slow response lean control Wiring, intake/exhaust leak, fuel level low, fuel pressure, EVAP canister purge valve, injector(s), H025, ECM
P1094 230 Heated oxygen sensor (H02S) 1, bank 2 – slow response rich control Wiring, intake/exhaust leak, fuel level low, fuel pressure, EVAP canister purge valve, injector(s), H025, ECM
P110F 11201 Ambient air temperature sensor- CAN data bus malfunction Wiring, air temperature sensor, ECM
P1100 57 Mass air flow (MAF) sensor – high input Wiring, MAF sensor, ECM
P111E 12041 Intake air temperature (IAT) sensor 1 – maximum temperature incorrect Wiring, IAT sensor, ECM
P111F 12041 Intake air temperature (IAT) sensor 1 – minimum temperature incorrect Wiring, IAT sensor, ECM
P1115 10122 Ambient air temperature sensor – circuit malfunction Wiring, air temperature sensor, ECM
P1117 57 Mass air flow (MAF) sensor/volume air flow   (VAF) sensor, bank 2 – low input Wiring, connector(s), MAF sensorNAF   sensor
P1118 57 Mass air flow (MAF) sensor/volume air flow   (VAF) sensor, bank 2 – high input Wiring, connector(s), MAF sensorNAF   sensor
P112A 12001 Engine coolant temperature (ECT)   sensor 1 – maximum temperature incorrect Wiring, ECT sensor
P112B 12001 Engine coolant temperature (ECT)   sensor 1 – minimum temperature incorrect Wiring, ECT sensor
P1130 10017 Heated oxygen sensor (H02S) 2, bank 1 – dynamic test malfunction Wiring, H025, ECM
P1130 11373 Heated oxygen sensor (H02S) 2, bank 1 – dynamic test malfunction Wiring, H025, ECM
P1131 10023 Heated oxygen sensor (H02S) 2, bank 2 – dynamic test malfunction Wiring, H025, ECM
P1131 11374 Heated oxygen sensor (H02S) 2, bank 2 – dynamic test malfunction Wiring, H025, ECM
P1134 37 Heated oxygen sensor (H02S) 1, bank 1 – signal malfunction Wiring, H025, ECM
P1135 37 Heated oxygen sensor (H02S) 1, bank 1 – low voltage Wiring, H025, ECM
P1136 37 Heated oxygen sensor (H02S) 1, bank 1 – high voltage Wiring, H025, ECM
P1140 73 Mass air flow (MAF) sensor/volume air flow   (VAF) sensor- incorrect signal Wiring, connector(s), MAF sensorNAF   sensor
P1151 38 Heated oxygen sensor (H02S) 1, bank 2 – signal malfunction Wiring, H025, ECM
P1152 38 Heated oxygen sensor (H02S) 1, bank 2 – low voltage Wiring, H025, ECM
P1153 38 Heated oxygen sensor (H02S) 1, bank 2 – high voltage Wiring, H025, ECM
P1171 196 Ambient pressure sensor – recognition value incorrect Wiring, ambient pressure sensor, ECM
P1172 196 Ambient pressure sensor – recognition value error Wiring, ambient pressure sensor, ECM
P1173 196 Ambient pressure sensor – recognition learning failed Learning procedure not performed
P1178 216 Heated oxygen sensor (H02S) 1, bank 1 – slow switching Wiring, H025, ECM
P1179 217 Heated oxygen sensor (H02S) 1, bank 2 – slow switching Wiring, H025, ECM
P1184 218 Heated oxygen sensor (H02S) 1, bank 1 – no activity detected Wiring, H025
P1185 219 Heated oxygen sensor (H02S) 1, bank 1 – no activity detected Wiring, H025
P1188 174 Fuel trim (FT) sensor 1, bank 1 – range/performance problem   Wiring, connectors, intake/fuel system, injectors, H02S, MAF sensor, ECT sensor, EVAP canister purge valve, ECM
P1189 175 Fuel trim (FT) sensor 1, bank 2 – range/   performance problem Wiring, connectors, intake/fuel system, injectors, H02S, MAF sensor, ECT sensor, EVAP canister purge valve, ECM
P1204 10277 Heated oxygen sensor (H02S) 2, bank 1 – circuit malfunction Wiring, H02S
P1205 10278 Heated oxygen sensor (H02S) 2, bank 2 – circuit malfunction Wiring, H02S
P1314 227 Fuel mixture – deviation with low fuel Wiring, fuel level low, fuel pressure, intake/exhaust leak, injector(s), H02S, EVAP canister purge valve, ECT sensor, ECM
P1314 228 Fuel mixture – deviation with low fuel Wiring, fuel level low, fuel pressure, intake/exhaust leak, injector(s), H02S, EVAP canister purge valve, ECT sensor, ECM
P1317 15 ‘B’ Camshaft position (CMP) actuator – range/performance problem Wiring, CMP actuator
P1327 59 Knock sensor (KS) 2, bank 1 – low input Wiring, KS incorrectly tightened, KS
P1327 10211 Knock sensor (KS) 2, bank 1 – low input Wiring, KS incorrectly tightened, KS
P1327 11881 Knock sensor (KS) 2, bank 1 – low input Wiring, KS incorrectly tightened, KS
P1328 10211 Knock sensor (KS) 2, bank 1 – high input Wiring, KS incorrectly tightened, KS
P1328 11881 Knock sensor (KS) 2, bank 1 – high input Wiring, KS incorrectly tightened, KS
P1329 10212 Knock sensor (KS) 3 – low input Wiring, KS incorrectly tightened, KS
P1329 11882 Knock sensor (KS) 3- low input Wiring, KS incorrectly tightened, KS
P1330 10212 Knock sensor (KS) 3 – high input Wiring, KS incorrectly tightened, KS
P1330 11882 Knock sensor (KS) 3 – high input Wiring, KS incorrectly tightened, KS
P1332 10213 Knock sensor (KS) 4 – low input Wiring, KS incorrectly tightened, KS
P1332 11883 Knock sensor (KS) 4 – low input Wiring, KS incorrectly tightened, KS
P1333 10213 Knock sensor (KS) 4 – high input Wiring, KS incorrectly tightened, KS
P1333 11883 Knock sensor (KS) 4- high input Wiring, KS incorrectly tightened, KS
P1340 213 Multiple cylinder(s) misfire – during start Wiring, fuel level low, ignition/fuel system, injector(s), spark plug(s), ignition coil(s), mechanical fault
P1341 204 Multiple cylinder(s) misfire – with fuel cut-off Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1342 205 Cylinder misfire during start – cylinder 1 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1343 196 Cylinder misfire with fuel cut-off – cylinder 1 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1344 206 Cylinder misfire during start – cylinder 2 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1345 197 Cylinder misfire with fuel cut-off – cylinder 2 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1346 207 Cylinder misfire during start – cylinder 3 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1347 198 Cylinder misfire with fuel cut-off – cylinder 3 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1348 208 Cylinder misfire during start – cylinder 4 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1349 199 Cylinder misfire with fuel cut-off- cylinder 4 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1350 209 Cylinder misfire during start – cylinder 5 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1351 200 Cylinder misfire with fuel cut-off – cylinder 5 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1352 210 Cylinder misfire during start – cylinder 6 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1353 201 Cylinder misfire with fuel cut-off- cylinder 6 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1354 211 Cylinder misfire during start – cylinder 7 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1355 202 Cylinder misfire with fuel cut-off- cylinder 7 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1356 212 Cylinder misfire during start – cylinder 8 Wiring, fuel level low, ignition/fuel system, injector, spark plug, ignition coil, mechanical fault
P1357 203 Cylinder misfire with fuel cut-off- cylinder 8 Wiring, fuel level low, ignition/fuel system, intake leak, mechanical fault
P1378 10238 ECM self-test – bank 2 knock control malfunction Wiring, KS, ECM
P1379 10239 ECM self-test – bank 2 knock control malfunction Wiring, KS, ECM
P1380 10217 ECM self-test – bank 2 knock control malfunction Wiring, KS, ECM
P1381 10215 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P1381 11890 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P1382 10216 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P1382 11890 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P1386 10214 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P1386 11890 ECM self-test – bank 1 knock control malfunction Wiring, KS, ECM
P140A 10080 Secondary air injection (AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P140A 10750 Secondary air injection (AIR) system, bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR
P140A 10081 Secondary air injection (AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P140A 10760 Secondary air injection (AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P140B 10080 Secondary air injection (AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P140B 10080 Secondary air injection {AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P140C 10081 Secondary air injection (AIR) system,bank 1, bank 2 – insufficient flow detected   Hose connection(s), AIR valve, AIR pump  
P140C 10760 Secondary air injection (AIR) system,   bank 1, bank 2 – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P1413 35 Secondary air injection (AIR) pump relay – signal low Wiring, connector, AIR pump relay
P1413 10084 Secondary air injection (AIR) pump relay – signal low Wiring, connector, AIR pump relay
P1413 10755 Secondary air injection (AIR) pump relay – signal low Wiring, connector, AIR pump relay
P1414 35 Secondary air injection (AIR) pump relay – signal high Wiring, connector, AIR pump relay
P1414 10084 Secondary air injection {AIR) pump relay – signal high Wiring, connector, AIR pump relay
P1414 10755 Secondary air injection (AIR) pump relay – signal high Wiring, connector, AIR pump relay
P1423 171 Secondary air injection (AIR) system – insufficient flow detected Hose connection(s), AIR valve, AIR   pump
P1432 171 Secondary air injection {AIR) system – incorrect flow detected Hose connection(s), AIR valve, AIR   pump
P1434 10775 Diagnostic module tank leakage Wiring, diagnostic module
P1447 10775 Diagnostic module tank leakage – pump current too high during test Wiring, diagnostic module
P1448 10775 Diagnostic module tank leakage – pump current too low Wiring, diagnostic module
P1449 10775 Diagnostic module tank leakage – pump current too high Wiring, diagnostic module
P1500 211 Idle speed control (ISC) actuator – stuck open Idle speed control (ISC) actuator
P1501 211 Idle speed control (ISC) actuator- stuck closed Idle speed control (ISC) actuator
P1502 2 Idle speed control (ISC) actuator closing solenoid – signal high Wiring, connector(s), ISC actuator closing
P1502 27 Idle speed control (ISC) actuator closing solenoid – signal high Wiring, connector(s), ISC actuator closing solenoid, ECM
P1503 2 Idle speed control (ISC) actuator closing solenoid – signal low Wiring, connector(s), ISC actuator closing
P1503 27 Idle speed control (ISC) actuator closing solenoid – signal low Wiring, connector(s), ISC actuator closing solenoid, ECM
P1504 2 Idle speed control (ISC) actuator closing solenoid – open circuit Wiring, connector(s), ISC actuator closing
P1504 27 Idle speed control (ISC) actuator closing solenoid – open circuit Wiring, connector(s), ISC actuator closing solenoid, ECM
P1506 29 Idle speed control (ISC) actuator opening solenoid – signal high Wiring, connector(s), ISC actuator opening
P1506 53 Idle speed control (ISC) actuator opening solenoid – signal high Wiring, connector(s), ISC actuator opening solenoid, ECM
P1507 29 Idle speed control (ISC) actuator opening solenoid – signal low Wiring, connector(s), ISC actuator opening solenoid, ECM
P1507 53 Idle speed control (ISC) actuator opening solenoid – signal low Wiring, connector(s), ISC actuator opening solenoid, ECM
P1508 29 Idle speed control (ISC) actuator opening solenoid – open circuit Wiring, connector(s), ISC actuator opening solenoid, ECM
P1508 53 Idle speed control (ISC) actuator opening solenoid – open circuit Wiring, connector(s), ISC actuator opening solenoid, ECM
P1509 29 Idle speed control (ISC) actuator- opening malfunction Wiring, ISC actuator opening solenoid
P1512 124 Differential intake manifold circuit – signal low Wiring, ECM
P1513 124 Differential intake manifold circuit – signal high Wiring, ECM
P1515 12160 Engine off timer – incorrect Wiring, ECM
P151F 12110 CAN data bus, vehicle speed sensor – timeout Wiring
P152A 12111 Vehicle speed sensor (VSS) – speed too low compared to reference value Wiring, VSS
P152B 12111 Vehicle speed sensor (VSS) – speed too low compared to reference value Wiring, VSS
P1525 67 ‘A’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1525 72 ‘A’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1526 74 ‘A’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1526 75 ‘A’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1531 21 ‘B’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1531 22 ‘B’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1532 83 ‘B’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1532 84 ‘B’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1550 2 Idle speed control (ISC) actuator – closing malfunction Wiring, ISC actuator
P1552 67 ‘A’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1556 72 AIC compressor – signal low Wiring
P1560 22 ‘B’ Camshaft position (CMP) actuator, bank 1 – open circuit Wiring, CMP actuator
P1565 21 Multifunction steering wheel – interface malfunction Wiring, buttons ‘+’ and ‘-‘ pressed together
P1569 74 ‘A’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1573 75 ‘A’ Camshaft position (CMP) actuator, bank 2 – signal low Wiring, CMP actuator
P1581 83 ‘B’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P1585 149 Random/multiple cylinder(s) – misfire detected Fuel level low, ignition/fuel system, injector(s), intake leak, mechanical fault
P1594 84 ‘B’ Camshaft position (CMP) actuator, bank 2 – open circuit Wiring, CMP actuator
P164A 11891 Knock sensor (KS) – timeout Wiring, KS
P1602 48 ECM self-test – defective ECM
P1602 122 ECM self-test – defective ECM
P1602 231 ECM self-test – defective ECM
P1603 49 ECM self-test – torque monitoring Wiring, ECM
P1604 50 ECM self-test – speed monitoring Wiring, ECM
P1611 129 Transmission control module (TCM) – communication malfunction Wiring, TCM, ECM
P1611 10505 Transmission control module (TCM) – communication malfunction Wiring, TCM, ECM
P1619 123 Map cooling thermostat control circuit – signal low Wiring, map cooling thermostat
P1620 123 Map cooling thermostat control circuit – signal high Wiring, map cooling thermostat
P1624 146 Accelerator pedal position (APP) sensor 1 – circuit malfunction Wiring, APP sensor, ECM
P1625 147 Accelerator pedal position (APP) sensor 2 – circuit malfunction Wiring, APP sensor, ECM
P1628 10089 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1628 11521 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1629 10089 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1629 11521 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1631 10133 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1631 11520 Throttle valve actuator – spring test malfunction, bank 1 Wiring, throttle valve actuator, ECM
P1632 115 Throttle valve – adaptation failure Wiring, throttle valve adaptation, throttle motor position sensor, ECM
P1633 115 Throttle valve adaptation – limp-home position incorrect Wiring, throttle valve adaptation, throttle motor position sensor, ECM
P1634 115 Throttle valve adaptation -spring test failed, bank 1 Wiring, mechanical fault, ECM
P1634 10133 Throttle valve adaptation -spring test failed, bank 1 Wiring, mechanical fault, ECM
P1634 11520 Throttle valve adaptation – spring test failed, bank 1 Wiring, mechanical fault, ECM
P1635 115 Throttle valve adaptation – mechanical stop not adapted Wiring, throttle valve adaptation, throttle motor position sensor, ECM
P1636 109 Throttle valve control circuit, bank 1 – circuit malfunction Wiring, throttle motor position sensor, ECM
P1636 10132 Throttle valve control circuit, bank 1 – circuit malfunction Wiring, throttle motor position sensor, ECM
P1637 162 Throttle position control- control deviation, bank 1 Wiring, throttle motor position sensor, ECM
P1637 10130 Throttle position control- control deviation, bank 1 Wiring, throttle motor position sensor, ECM
P1637 11505 Throttle position control – control deviation, bank 1 Wiring, throttle motor position sensor, ECM
P1638 160 Throttle position control – throttle stuck temporarily, bank 1 Wiring, mechanical fault, ECM
P1638 10131 Throttle position control – throttle stuck temporarily, bank 1 Wiring, mechanical fault, ECM
P1638 11504 Throttle position control – throttle stuck temporarily, bank 1 Wiring, mechanical fault, ECM
P1639 161 Throttle position control – throttle stuck permanently, bank 1 Wiring, mechanical fault, ECM
P1639 10131 Throttle position control – throttle stuck permanently, bank 1 Wiring, mechanical fault, ECM
P1639 11504 Throttle position control – throttle stuck permanently, bank 1 Wiring, mechanical fault, ECM
P1640 155 Engine control module (ECM) – RAM/ROM   malfunction ECM
P1640 156 Engine control module (ECM) – RAM/ROM   malfunction ECM
P1653 134 Transmission torque – signal incorrect Wiring, TCM
P1654 134 CAN data bus signal – timeout Wiring, ECM
P1663 155 Immobilizer control module – incorrect coding Key learning procedure
P1663 156 Immobilizer control module – incorrect coding Key learning procedure
P1670 134 Transmission intervention – incorrect signal Wiring, TCM
P1675 135 Throttle valve actuator, start test – adaptation required Throttle valve actuator adaptation
P1694 136 Throttle valve actuator, start test – spring test and limp-home position failed Wiring, mechanical fault, ECM
P3012 10308 Heated oxygen sensor (H02S) 1, bank 1 – adaptation value too high Wiring, H025, ECM
P3012 11339 Heated oxygen sensor (H02S) 1, bank 1 – adaptation value too high Wiring, H025, ECM
P3013 10291 Heated oxygen sensor (H02S) 1, bank 2 – adaptation value too high Wiring, H025, ECM
P3013 11340 Heated oxygen sensor (H02S) 1, bank 2 – adaptation value too high Wiring, H025, ECM
P3014 10308 Heated oxygen sensor (H02S) 1, bank 1-   voltage malfunction Wiring, H02S, ECM
P3014 11339 Heated oxygen sensor (H02S) 1, bank 1 – voltage malfunction Wiring, H025, ECM
P3015 10291 Heated oxygen sensor (H02S) 1, bank 2 – voltage malfunction Wiring, H025, ECM
P3015 11340 Heated oxygen sensor (H02S) 1, bank 2 – voltage malfunction Wiring, H025, ECM
P3016 10013 Heated oxygen sensor (H02S) 1, bank 1 – calibration malfunction Wiring, H025, ECM
P3016 11424 Heated oxygen sensor (H02S) 1, bank 1 – calibration malfunction Wiring, H025, ECM
P3017 10005 Heated oxygen sensor (H02S) 1, bank 2 – calibration malfunction Wiring, H02S, ECM
P3017 11425 Heated oxygen sensor (H02S) 1, bank 2 – calibration malfunction Wiring, H02S, ECM
P3018 10313 Heated oxygen sensor (H02S) 1, bank 1 – lambda control malfunction Wiring, H02S
P3018 11341 Heated oxygen sensor (H02S) 1, bank 1 – lambda control malfunction Wiring, H02S
P3019 10292 Heated oxygen sensor (H02S) 1, bank 2 – lambda control malfunction Wiring, H02S
P3019 11342 Heated oxygen sensor (H02S) 1, bank 2- lambda control malfunction Wiring, H02S
P3020 10313 Heated oxygen sensor (H02S) 1, bank 1 – signal voltage malfunction Wiring, H02S
P3020 11341 Heated oxygen sensor (H02S) 1, bank 1 – signal voltage malfunction Wiring, H02S
P3021 10292 Heated oxygen sensor (H02S) 1, bank 2 – signal voltage malfunction Wiring, H02S
P3021 11342 Heated oxygen sensor (H02S) 1, bank 2- signal voltage malfunction Wiring, H02S
P3022 10308 Heated oxygen sensor (H02S) 1, bank 1 – communication malfunction Wiring, H02S
P3022 11339 Heated oxygen sensor (H02S) 1, bank 1 – communication malfunction Wiring, H02S
P3023 10291 Heated oxygen sensor (H02S) 1, bank 2 – communication malfunction Wiring, H02S
P3023 11340 Heated oxygen sensor (H02S) 1, bank 2- communication malfunction Wiring, H02S
P3024 10308 Heated oxygen sensor (H02S) 1, bank 1 –   initialization malfunction Wiring, H02S
P3024 11339 Heated oxygen sensor (H02S) 1, bank 1 – initialization malfunction Wiring, H02S
P3025 10291 Heated oxygen sensor (H02S) 1, bank 2 – initialization malfunction Wiring, H02S
P3025 11340 Heated oxygen sensor (H02S) 1, bank 2 – initialization malfunction Wiring, H02S
P3026 10013 Heated oxygen sensor (H02S) 1, bank 1 – operating temperature malfunction Wiring, H02S, ECM
P3026 11424 Heated oxygen sensor (H02S) 1, bank 1 –   operating temperature malfunction Wiring, H02S, ECM
P3027 10005 Heated oxygen sensor (H02S) 1, bank 2- operating temperature malfunction Wiring, H02S, ECM
P3027 11425 Heated oxygen sensor (H02S) 1, ban·k 2- operating temperature malfunction Wiring, H02S, ECM
P3028 10013 Heated oxygen sensor (H02S) 1, bank 1 – no activity Wiring, H02S, ECM
P3028 11424 Heated oxygen sensor (H02S) 1, bank 1 – no activity Wiring, H02S, ECM
P3029 10005 Heated oxygen sensor (H02S) 1, bank 2 – no activity Wiring, H02S, ECM
P3029 11425 Heated oxygen sensor (H02S) 1, bank 2 – no activity Wiring, H02S, ECM
P3200 52615 Transmission control module (TCM) – CAN   chip defective TCM
P3201 52615 Transmission control module (TCM) – CAN   chip defective TCM
P3202 52615 Transmission control module (TCM) – CAN   chip defective TCM
P3203 52619 Local CAN data bus – malfunction Wiring, connected modules
P3204 52619 Local CAN data bus – malfunction Wiring, connected modules
P3205 52619 Local CAN data bus – malfunction Wiring, connected modules
P320D 10621 CAN data bus monitoring – ETC timeout Wiring, connected modules
P3200 11722 CAN data bus monitoring – ETC timeout Wiring, connected modules
P3200 11723 CAN data bus monitoring – ETC timeout Wiring, connected modules
P321E 12151 Ambient pressure sensor – maximum pressure incorrect Wiring, ambient pressure sensor
P321F 12151 Ambient pressure sensor – minimum pressure incorrect Wiring, ambient pressure sensor
P3213 10505 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P3213 11722 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P3213 10621 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P3213 11723 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P3214 10505 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P3214 17722 CAN data bus monitoring – ETC check malfunction Wiring, connected modules
P322A 12151 Ambient pressure sensor – open circuit Wiring, ambient pressure sensor
P323C 12151 Ambient pressure sensor – comparison current incorrect Wiring, ambient pressure sensor